sE Electronics sE8 Stereo Pair condenser mic kit

Designed for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package.
The sE8 itself is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule.
Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response. With two microphones matched specifically for consistency, you'll be able to capture a clear and accurate stereo image.

The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.

Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB.

You'll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.

To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis.
The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come.
Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they're not in use.