Classic Console Compressor Bundle™. Classic Analog
Compression for mixing in the box.
Includes
- URS 1970 Compressor
- URS 1980 Compressor
URS 1970
Compressor
The URS 1970 Classic Console Compressor digitally
recreates a popular 1970's British Console Buss Comprerssor Limiter.
The URS 1970's Classic Console Compressor features digital
recreation of transformer input and diode bridge gain reduction amplifier
characterics.
Smooth and warm!
High Res 48 bit "Double Precision"
processing
The URS Classic Console Compressors TDM versions feature
Hi Resolution 48-bit TDM and 64-bit RTAS "Double Precision" processing for
increased clarity, headroom and unparalleled gain reduction. Hi Resolution
"Double Precision" processing helps to avoid internal clipping in the Digital
Domain.
Independent Compressor and Limiter
sections
The Compressor and Limiter sections are totally
independent of each other. Both feature separate variable Attack, Release and
Threshold controls.
Built in Internal Side Chain
Filtering
The Internal Side Chain High and Low Pass Filters fine
tune how narrow or "Broad Band" the URS Classic Console Compressor will affect
the program material. Both Filters completely overlap to dial in problem
frequencies.
Listen Key
The Listen Key is after the Filters section. The Listen
Key allows you to monitor the signal being sent to the Gain Reduction detection
circuit.
Signal Flow explained
The URS Classic Console Compressors signal flow inserts
the Gain Makeup control before the final Limiter. This is the secret to how hard
you can hit the final "Brick Wall" Limiter. The URS Classic Console Compressors
utilize Feed-back gain sensing. Feed-back gain sensing gives Compression and
Limiting a servo type of control. See the detailed signal flow diagram
below.
Classic Sound with Modern Features
The URS Classic Console Compressor adds other powerful
modern features such as totally variable Compression Ratios, Attack and Release
times.
Two Different Plug-ins
Two different URS 1970 Classic Console Compressor plug-ins
are included in this bundle.
The 1970 version includes
- Compressor/ Limiter / Side Chain version
- Compressor only version
The 1970 Compressor /Limiter / Side chain version has a
"Brick Wall Limiter to smooth out the most difficult musical tracks. The 1970
Compressor /Limiter / Side chain version is well suited for Drum Sub Groups, Aux
sends (TDM versions) and especially on the Mix Bus.
The 1970 Compressor only version is 3x more DSP efficient.
The Compressor only version is very well suited on general instruments, such as
vocals, guitars, bass and individual drums. The 1970 Compressor Only version
will act as a Limiter when the ratio is set at 10:1 and above.
Features
- Pro Tools 7.0 and Tiger OSX 10.4.2 compatibility
- Pro Tools 6.9.2 and Tiger OSX 10.4.2 compatibility
- Pro Tools 6.9.2and Panther OSX 10.4.2 compatibility
- Pro Tools 6.7 and Panther OSX 10.3.9 compatibility
- Pro Tools 6.2.3 and Jaguar 10.2.8 compatibility
- Pro Tools 5.3.1 and Mac OS9 compatibility
- Pro Tools M-Powered version 6.8 compatibility
- Full Windows XP support!
- Full Pro Tools TDM support for Pro Tools|HD Accel, Pro
Tools|HD and Pro Tools 24|MIX systems
- Full 192 kHz support for TDM, RTAS and AudioSuite
versions
- Full ProControl, Control|24, Command|8 and Digi 002
support
- Full ICON Console Control Surface support �Eincluding
center section Dinamics panel
- Supports Mbox, Digi 001, Digi 002, Digi 002 Rack, Pro
Tools|24 MIX, Pro Tools|HD and Pro Tools|HD Accel and M-Audio Interfaces.
1970's Specifications
- Transformer input stage emulation
- Input Level
- Gain Make up Output Control
- Separate Limiter and Compressor Threshold controls
- Variable Limiter Attack Time 1ms - 50ms.
- Variable Limiter Release Time 50ms - 1500ms
- "Brick Wall" Limiter Ratio fixed at 1000:1
- Variable Compressor Attack Time 1ms - 50ms.
- Variable Compressor Release Time 100ms - 1500ms.
- Selectable Compressor Ratio 1:1, 2:1, 3:1, 4:1. 6:1,
8:1, 10:1, 20:1. Infinity
- Variable Hi-pass Filter Side chain @ 12dB per Octave
20hz to 5K
- Variable Lo-pass Filter Side chain @ 12dB per Octave
20Khz to 1k
- Gain Reduction Meter - selectable Limiter, Compressor
or both
- In / Out Bypass switch
- Line input Trim offers -10 to +20 gain variable to .1db
- Plasma Style Input and Output VU Meters
- Compressor/Limiter/Sidechain Instances- 9 per HD Accel
chip and 4 Instances per HD chip and 2 per MIX chip
- Compressor only Instances - 17 per HD Accel chip and 8
Instances per HD chip and 4 per MIX chip
URS 1980
Compressor
The URS 1980 Classic Console Compressor digitally
recreates a popular 1980's British Console Buss Compressor.
The URS 1980 Classic Console Compressor features
digital recreation of the IC input and voltage controlled gain reduction
amplifier (VCA) characteristics.
Snappy and aggressive!
High Res 48 bit "Double Precision" processing
The URS Classic Console Compressors TDM versions feature
Hi Resolution 48-bit TDM and 64-bit RTAS "Double Precision" processing for
increased clarity, headroom and unparalleled gain reduction. Hi Resolution
"Double Precision" processing helps to avoid internal clipping in the Digital
Domain.
Independent Compressor and Limiter
sections
The Compressor and Limiter sections are totally
independent of each other. Both feature separate variable Attack, Release and
Threshold controls.
Built in Internal Side Chain
Filtering
The Internal Side Chain High and Low Pass Filters fine
tune how narrow or "Broad Band" the URS Classic Console Compressor will affect
the program material. Both Filters completely overlap to dial in problem
frequencies.
Listen Key
The Listen Key is after the Filters section. The Listen
Key allows you to monitor the signal being sent to the Gain Reduction detection
circuit.
Signal Flow explained
The URS Classic Console Compressors signal flow inserts
the Gain Makeup control before the final Limiter. This is the secret to how hard
you can hit the final "Brick Wall" Limiter. The URS Classic Console Compressors
utilize Feed-back gain sensing. Feed-back gain sensing gives Compression and
Limiting a servo type of control.
Classic Sound with Modern Features
The URS Classic Console Compressor adds other powerful
modern features such as totally variable Compression Ratios, Attack and Release
times.
Two Different Plug-ins
Two different URS 1980 Classic Console Compressor plug-ins
are included in this bundle.
The 1980 version includes
- Compressor/ Limiter / Side Chain version
- Compressor only version
The 1980 Compressor /Limiter / Side chain version has a
modern "Brick Wall Limiter that was not found on the vintage unit. The 1980
Compressor /Limiter / Side chain version is also well suited for drum Sub
groups, Aux sends (TDM versions) and highly recommended especially on the Mix
Bus.
The 1980 Compressor only version is also 3x more DSP
efficient. The 1980 Compressor Only version will act as a Limiter when the ratio
is set at 10:1 and above.
Features
- Pro Tools 7.0 and Tiger OSX 10.4.2 compatibility
- Pro Tools 6.9.2 and Tiger OSX 10.4.2 compatibility
- Pro Tools 6.9.2and Panther OSX 10.4.2 compatibility
- Pro Tools 6.7 and Panther OSX 10.3.9 compatibility
- Pro Tools 6.2.3 and Jaguar 10.2.8 compatibility
- Pro Tools 5.3.1 and Mac OS9 compatibility
- Pro Tools M-Powered version 6.8 compatibility
- Full Windows XP support!
- Full Pro Tools TDM support for Pro Tools|HD Accel, Pro
Tools|HD and Pro Tools 24|MIX systems
- Full 192 kHz support for TDM, RTAS and AudioSuite
versions
- Full ProControl, Control|24, Command|8 and Digi 002
support
- Full ICON Console Control Surface support �Eincluding
center section Dynamics panel
- Supports Mbox, Digi 001, Digi 002, Digi 002 Rack, Pro
Tools|24 MIX, Pro Tools|HD and Pro Tools|HD Accel and M-Audio Interfaces.
1980's Specifications
- Input Level
- Gain Make up Output Control
- Separate Limiter and Compressor Threshold controls
- Variable Limiter Attack Time 1ms - 50ms.
- Variable Limiter Release Time 50ms - 1500ms
- "Brick Wall" Limiter Ratio fixed at 1000:1
- Variable Compressor Attack Time 1ms - 50ms.
- Variable Compressor Release Time 100ms - 1500ms.
- Selectable Compressor Ratio 1:1, 2:1, 3:1, 4:1. 6:1,
8:1, 10:1, 20:1. Infinity
- Variable Hi-pass Filter Side chain @ 12dB per Octave
20hz to 5K
- Variable Lo-pass Filter Side chain @ 12dB per Octave
20Khz to 1k
- Gain Reduction Meter
- In / Out Bypass switch - selectable Limiter, Compressor
or both
- Line input Trim offers -10 to +20 gain variable to .1db
- Plasma Style Input and Output VU Meters
- Compressor/Limiter/Sidechain Instances- 9 per HD Accel
chip and 4 Instances per HD chip and 2 per MIX chip
- Compressor only Instances - 17 per HD Accel chip and 8
Instances per HD chip and 4 per MIX chip
System Requirements
Mac
- RTAS - Mac OS X, Mac OS9
- Audio Units and VST Mac OSX coming soon
PC
- RTAS - Windows XP
- VST PC coming soon
800-834-5986
