Tannoy AMS 8DC 8" Dual Concentric Surface Mount Loudspeaker, (Single,Black)

Tannoy AMS 8DC 8" Dual Concentric Surface Mount Loudspeaker (SINGLE , Black)

Please Note:
This speaker is priced as a SINGLE speaker,
They must purchased in Multiples of 2 units:
EXAMPLE: 2, 4, 6, 8, 10
This is due to the fact that they are BOXED in PAIRS at Tannoy.

The minimum order is 2 units.

Product Highlights

• Next-generation Dual Concentric driver featuring Omnimagnet technology
• Torus Ogive waveguide for improved broadband directivity
• Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
• Transformer Taps (via front rotary switch):
  • 70 V: 60 W / 30 W / 15 W / 7.5 W / OFF & low impedance operation
  • 100 V: 60 W / 30 W / 15 W / OFF & low impedance operation
• 16-ohm drivers optimized for use with Lab.gruppen LUCIA amplifiers
• Optional any-angle accessory bracket available
• Weather resistant rated IP65 to EN60529 (IEC529)
• Thickened 5 mm high-temperature molded cabinets
• Custom color options

About Tannoy AMS 8DC

The AMS 8DC-WH is a full bandwidth 360-Watt high sensitivity loudspeaker that utilizes our all-new proprietary 8" Dual Concentric point-source driver with Omni magnet technology on a Torus Ogive Waveguide to deliver wide and consistent broadband directivity with enhanced intelligibility - plus the linear response of our legendary studio monitors. The AMS 8DC-WH is ideally suited for stereo or mono background/foreground music applications in theme parks, hotels, restaurants and bars, retail stores, as well as corporate AV, residential developments and houses of worship. AMS 8DC-WH loudspeakers provide a seamless sound signature within a multi-zoned environment that benefits from both ceiling and wall mounted Tannoy loudspeakers.

Weather-Resistant Enclosure
The elegantly styled semi white molded enclosure blends beautifully into any decor. Additionally the AMS 8DC-WH's design and performance has achieving an IP65 rating, making it an exceptional choice for both indoor and outdoor environments such as indoor swimming pools, saunas or work areas with unusually high levels of dust or moisture and outdoor applications where weather conditions are moderate.

Attractive and Easy to Install
The highly durable and heat resistant ABS enclosure features a white painted finish and comes with an aesthetically pleasing grille. Installation is quick and easy thanks to the included color-matched yoke mounting bracket - and an optional VARIBALL multi-angle bracket is available separately. An included weatherproof cable gland protects the Phoenix input and link output connectors, as well as the integral low-insertion loss 60 W transformer with convenient tap switching.

LAB GRUPPEN Ready
The AMS 8DC-WH is optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 AMS Series loudspeakers per channel.

Tannoy AMS 8DC Specifications

---

Application

Application

Multi-zone foreground music and paging
Boardrooms, offices and courtrooms
Business music systems
Airports, convention centers and hotels
Auxiliary systems in houses of worship
Lounges and bars
Cruise ships

Performance

Frequency response (-3 dB)

65 Hz - 30 kHz

Frequency range (-10 dB)

53 Hz - 40 kHz

System Sensitivity (1W at 1 m)

92 dB (1 W = 4 V for 16 Ohms)

Nominal Coverage Angle

90 degrees conical

Power Handling

Average: 90 W
Programme: 180 W
Peak: 360 W

Recommended Amplifier Power

180W at 16 Ohms

Nominal Impedance (Lo, Z)

16 Ohms

Rated Maximum SPL

Average: 111 dB
Peak: 117 dB

Transformer Taps-via front rotary switch

70 V: 60 W / 30 W / 15 W / 7.5 W / OFF & low impedance operation
100 V: 60 W / 30 W / 15 W / OFF & low impedance operation

Transducers

Dual Concentric point source driver

1x 8" (20.32cm) Dual Concentric driver, using Omnimagnet technology

Low Frequency

1.75" (4.45cm) voice coil, treated multi fiber paper pulp cone

High Frequency

1" (2.54cm) PEI dome

Physical

Enclosure

ABS

Grille

Weather-resistant zinc nickel-plated steel grille

Connectors

Removable locking connector with screw terminals

Transformer setting

Rotary switch

Dimensions (HxWxD)

Excluding bracket: 407.5 x 260.0 x 259.7mm (16.04 x 10.24 x 10.22")
Including bracket: 409.8 x 260.0 x 306.3mm (16.13 x 10.24 x 12.06")

Weight

7.82kg (17.24 lbs)