Home > Microphones > Condenser and Tube Microphones >

Schoeps DZC20g - 20dB Attenuator, gray finish


Schoeps DZC20g - 20dB Attenuator, gray finish
DZC10 Shown
 
List Price: $202.00
PAS DEAL $202.00
You'll earn 202 points
.


Free Shipping

Availability: Usually Ships in 1 to 2 Business Days

Product Code : DZC20G
QTY:

DESCRIPTION SPECIFICATIONS
 
DZC 20G, 20 dB pad, matte gray, Schoeps

Under extreme conditions, even a Schoeps Colette series microphone can be overdriven by very high sound pressure levels. Here the limiting factor is not the capsule but the microphone amplifier. The overload point ranges from 128 - 135 dB-SPL, depending on the capsule and the amplifier type (e.g. 5 dB lower with the +5 dB version).
In these situations the signal level at the amplifier input may be attenuated by inserting a DZC between the capsule and the microphone amplifier or the Active Ac cessories.
The use of two DZC 10 on one microphone will result in an attenuation of only ca. 15 dB due to the capacitive principle of operation. If the level must be attenuated by a full 20 dB, a DZC 20 should be used.
  • ca. 10 dB constant attenuation
  • raises maximum sound pressure level by ca. 10 dB
  • attenuates signal ahead of CMC microphone ampli fiers of the Colette modular system




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Microphones > Condenser and Tube Microphones
Microphones > Microphone Accessories
Microphones > Microphone Accessories > Miscellaneous Microphone Accessories
Microphones > Schoeps Microphones
Microphones