Golden Age Project R1 Active MK3 Active Ribbon Microphone

Golden Age Project R1 Active MK3 - Active Ribbon Microphone

R1-MK3, ACTIVE Ribbon Microphone, Golden Age Golden Age Project

R1 Active MKIII ribbon microphone offers the smooth high end and extended lows that make ribbon mics so popular with recording engineers and producers. Thanks to its active circuitry, which includes a bipolar/FET discrete low-noise amplifier, it offers higher-than-expected output for a ribbon mic.

The ribbon in the R1 Active MKIII is 50 mm long and 2 microns thick. The mic is designed to provide fast and life-like transient reproduction, and can handle sound pressure levels up to 150 dB SPL.

As is typical for a ribbon mic, it has a figure-8 polar pattern, which means it picks up primarily from the front and rear of the capsule and rejects sounds coming from the sides. You can use this to your advantage in the studio to help minimize bleed when two or more sources are recording in the same room. The R1 Active MKIII is well-suited for electric guitar, vocals, strings, horns, acoustic instruments, orchestras, choral groups, and many live-sound applications.

A soft transport case and an XLR mic cable are included.

Offers the natural and musical sound of a classic ribbon microphone

Ultra-realistic reproduction

Fast and life-like transient response

Provides the characteristic large-and-mellow ribbon-mic sound quality, featuring a very smooth top end and an extended low end

A Bipolar/FET, discrete, low-noise amplifier with a low-impedance transformerless output stage. Powered by standard 48V phantom power, it raises the output level and isolates the ribbon and gain-make-up transformer from the outside world

The Figure-8 polar pattern offers wide sweet spots both in the front and in the back of the microphone, and rejection on the sides

A ribbon that's 50 mm long and made of 2-micron-thick aluminum foil

An internal shock mount for the ribbon and magnet assembly

Soft transport case and XLR mic cable included

Manufactured from the finest materials for great performance and long-term reliability

Can be used with any standard mixer or preamp, preferably with a balanced input, which can supply 48V phantom power

• Type: Large ribbon geometry, pure aluminium, 2 um  thick, 50 x 5 mm size with active electronics.
• Polar pattern: Figure 8
• Frequency response: 30 Hz  18 kHz +/- 3 dB
• Sensitivity: -42 dB (0 dB = 1V/Pa) @ 1 kHz.
• Equivalent Noise Level (A-weighted per IEC  268-4): < 18 dB typical.
• Maximum SPL (<1% THD @ 1 kHz):  160 dB.
• Output impedance: 200 ohm, balanced
• Recommended load impedance: > 1000  Ohms.
• Dimensions: 69x185 mm.
• Weight: 1 450 g.