Triplicator makes your job easier. When you need to copy your critical data to multiple drives, Triplicator saves you time and energy by doing the copies in a single action. When you copy data through the Triplicator, identical data will be copied to all the target drives. Perfect for any production workflow when you need on-site backups of your valuable data. The first product from the new Glyph Production Technologies.

Triplicator is easy. Here's how it works:

1. Connect two or three drives to Triplicator's eSATA device ports
2. Connect the Triplicator to your computer via FireWire 800, USB or eSATA
3. Power on drives and Triplicator. LED tells you number of drives attached
4. Copy data - the destination is seen as one drive through the Triplicator

Connections

The Triplicator can be connected to the computer via eSATA, FireWire or USB using any of the ports marked "computer connections". The target drives are connected to the Triplicator via eSATA cables only, using the ports marked "eSATA drive 1", "eSATA drive 2", etc. The Triplicator supports any eSATA connected drives, including the Glyph PortaGig 50, PortaGig 62, GT 050Q and GT 062E.

User Interface

Triplicator's user interface also provides important information during the copy process. The front panel includes a button designed to guard against unintended drive initialization. The first time you power on the Triplicator, the blue LED blinks to indicate that button press is required. On button press, the drives initialize and the blue LED goes to solid. After a few seconds a volume will be visible to your computer. Format this volume using your operating system utility, and you're ready to go. After the Triplicator has initialized the drives, the red LED pattern blinks to show the number of attached drives. If no drives are attached, the LED goes solid red. If a discovered drive disappears in the course of operation, it goes solid red.

In use

You can use the Triplicator volume as you would use the volume on any drive. However, when you copy data to the Triplicator volume, the data will be copied to all target drives at the same time. Once you are done working with the drives, you can unmount the volume just like any external drive, and connect the target drives individually to a computer. You will see that the same data is on each drive.

Drive capacities

It is best, but not necessary, for all of the drive capacities to be the same. If you connect three 500GB drives, the volume will be 500GB, because the same data is copied to all drives. If you connect two 500GB drives and one 250GB drive, the capacity will be equal to the smallest drive, so total capacity will be 250GB.

Remount functionality

After you have created a Triplicator drive set and copied data to the drives, the Triplicator and drives can be powered off and on. On power up, the Triplicator will discover and mount the previously created drive set. This allows you to work with the Triplicator as you would any other drive, while at the same time having your data present on up to three hard drives.

"The Triplicator with the remount functionality is awesome! This is exactly how I was hoping to use it. I had no problem powering down and remounting throughout the day and the time savings were substantial. I'm curious why no one has made something like this before because it's so obviously useful. It's coming with me on all my jobs, that's for sure."

Jason Diamond uses his Triplicator in a RED™ Camera and Digital Lab workflow. "After quite a bit of testing I'm happy to report that the Triplicator with "remount" functionality works well. Transfer speeds are as you would expect from a single drive, but the bonus is you're copying to three drives instead of one. This new 2nd generation Triplicator will be a great addition to any data centric workflow, and I know it will save us quite a bit of time on set."
Jason Diamond, MBS Productions, NYC

Best Warranty in the Industry.

We are confident that our drive systems perform at the most reliable level. We back them up with a 3-Year warranty, 2-Year Free Basic Data Recovery Policy, and 1-Year Advance Replacement (U.S. Continental 48 States only).

Optional rack-mount kits

The GT Series Single Rack Kit transforms your Triplicator into a 1U rack appliance. The Double Rack Kit mounts any two Glyph GT Series tabletop drives in a 1U rack space. (Sold separately).

Nobody likes wall-warts

They are easily misplaced, or accidentally unplugged from the enclosure, and take up valuable outlet space. The Triplicator uses an industry-standard power cord and pro-quality internal power supply for the most efficient and reliable power source possible.

Optional carrying case

Optional hard-molded plastic carrying case to protect your valuable work. The case is foam-lined and has room for your accessory cables. TRIPLICATOR WILL NO LONGER SHIP WITH CARRYING CASE BY LATE SEPTEMBER.

A cool drive is a healthy drive

The Triplicator uses a quiet internal fan for maximum airflow and proper cooling. The case is designed with front-panel ventilation holes to draw cool air in, while exhausting warm air out the back - critical to the performance and reliability of the components.