The integral 80Hz, 12dB/oct hi-pass filter removes unwanted low frequency energy. The advanced, transformerless electronics are self-contained to simplify installation. Available in 10", 15" and 20" lengths, the GNVP may be mounted on lecterns, pulpits and conference tables with the included mounting hardware or with other options available from Astatic.

A status indicator LED is located on the XLR housing that is visible to the speaker indicating that the microphone is operational. The LED on/off switch as well as polar pattern adjustment are hidden from unqualified tampering on the PCB within the XLR housing.

The Astatic GNVP has a variable polar pattern so it can shorten the list of products an audio system designer requires when miniature-gooseneck condenser microphones are indicated. From omnidirectional to cardioid, hypercardioid, figure-eight and all tight or wide directional polar patterns in between, an installer can precisely tailor the polar pattern for optimum performance. One gooseneck condenser microphone can suit almost any challenge when tasked to perform in business, government, worship, and media production.

Features

• Continuously-variable polar pattern
• RF (radio frequency) resistant architecture
• Status LED (defeatable)
• Controls secured within the XLR housing
• Available in three lengths (10", 15" & 20")
• Quick-mount format
• Balanced transformerless output circuitry
• Integrated hi-pass filter for elimination of unwanted low frequencies
• Silent, durable, dual-flex pipe design with strong positioning memory
• Non-reflective matte-black finish
• Included shock mount (approx. 20dB noise isolation)
• Included XLR-F type locking flange mount
• Included windscreen

Specifications

• Operating Principle: Condenser
• Polar Pattern: Continuously-variable
• Frequency Response: 80Hz-18kHz
• Sensitivity: -36dBV (16mV) @ 1Pa
• Impedance: 120 ohms
• Self Noise: 29 dBA
• Maximum SPL: 120dB, 1% THD
• Power Requirements: P12, P24, P48, 4 mA
• Connector: 3-pin male XLR type
• Polarity: Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3
• Finish: Durable matte-black urethane
• RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
• RoHS Compliant