CAD ASTATIC GN15VPD 15 in Gooseneck Mic Variable Polar Pattern,,Integrated Desk Stand

GN15VPD- 15" Gooseneck Microphone, Continuously Variable Polar Pattern, Integrated Desk Stand, CAD

The GNVPD is a series of dual-flex, continuously-variable polar pattern, miniature-gooseneck condenser microphones with:

• integrated desk stand, programmable membrane switch,
• LED, and logic interface.
• Continuously variable polar pattern, to adapt to the application or the environment
• 80Hz bass roll of filter
• LED
• membane switch, PUSH, TALK MUTE

Special attention has been taken to design the GNVPD series to resist interference from devices such as cell phones and two-way communication devices.

• The integral 80Hz, 12dB/octave high-pass filter removes unwanted low-frequency energy to improve intelligibility.
• The cable can easily be made to exit the bottom or the rear of the stand.
• The GNVPD series features logic I/O functions that can be utilized with automatic mixers, teleconferencing systems and control systems.
• The logic input can remotely control the LED as well as membrane switch activation.

• The membrane switch working with or bypassing the microphone's mute activates the logic output.
• Bypassing mute is particularly useful with teleconferencing systems that mute the microphones after the echo cancellation block.
• The exact mode of operation can be set with the DIP switch on the underside of the desk stand.
• The GNVPD has a continuously-variable polar pattern so it can shorten the list of products an audio system designer needs to consider when gooseneck condenser mics are specified.
• The installer can precisely tailor the polar pattern for the best performance depending upon the application or environment.
• The GNVPD is primarily designed for speech and vocal pickup in governmental, institutional, and business applications.

GN15VPD Specifications:

• Operating Principal: Condenser
• Polar Pattern: Continuously-variable
• Frequency Response: 80Hz - 18kHz
• Sensitivity: -36dBV (16mV) @ 1Pa
• Impedance: 120ohms
• Self Noise: 29dBA
• Max SPL: 120dB, 1% THD, 1KHz
• Power Requirements: P12, P24, P48, 4mA
• Connector: TB4M-type (TA4F-type to 3-pin male XLR-type cable included).
• Polarity: Positive pressure on diaphragm corresponds to positive voltage on pin 1 relative to pin 2 at TB4M-type connector.
• Logic Output: NPN open collector, 30V, 50mA, max
• Logic Input: 40K ohm pull-up resistor to 1.3V
• Finish: Durable matte-black urethane
• Dimensions: (See spec sheet pdf)
• Net Weight [Mass]:
• GN15VPD: 1lb 8oz [0.70Kg]
• GN20VPD: 1lb 10oz [0.73g]
• Packaged Weight [Mass]:
• GN15VPD: 2 lb
• RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
• RoHS Compliant
• Included Accessories: 30' [9m] cable, foam windscreen, adhesive "Astatic" security cover.

Operating Principal: Condenser
Polar Pattern: Continuously-variable
Frequency Response: 80Hz - 18kHz
Sensitivity: -36dBV (16mV) @ 1Pa
Impedance: 120ohms
Self Noise: 29dBA
Max SPL: 120dB, 1% THD, 1KHz
Power Requirements: P12, P24, P48, 4mA
Connector: TB4M-type (TA4F-type to 3-pin male XLR-type cable included).
Polarity: Positive pressure on diaphragm corresponds to positive voltage on pin 1 relative to pin 2 at TB4M-type connector.
Logic Output: NPN open collector, 30V, 50mA, max
Logic Input: 40K ohm pull-up resistor to 1.3V
Finish: Durable matte-black urethane
Dimensions: (See spec sheet pdf)
Net Weight [Mass]:
GN15VPD: 1lb 8oz [0.70Kg]
GN20VPD: 1lb 10oz [0.73g]
Packaged Weight [Mass]:
GN15VPD: 1lb 15oz [0.87Kg]
GN20VPD: 2lbs 0oz [0.90Kg]
RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
RoHS Compliant
�Specifications subject to change without notice.
Included Accessories: 30' [9m] cable, foam windscreen, adhesive �Astatic� security cover.