Audio-Technica U857Q Cardioid Condenser Quick-Mount Gooseneck Microphone

• Designed for high-quality sound reinforcement, professional recording and broadcasting
• Superior off-axis rejection for maximum gain before feedback
• UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no "memory" permits quick positioning into desired shape
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Self-contained electronics eliminate need for external power module
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
• Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
• Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface

SPECIFICATIONS

• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 30-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
• OPEN CIRCUIT SENSITIVITY: �39 dB (11.2 mV) re 1V at 1 Pa
• IMPEDANCE: 250 ohms
• MAXIMUM INPUT SOUND LEVEL: 139 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical): 115 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
• SWITCH: Flat, roll-off
• WEIGHT (MICROPHONE): 5.1 oz (144 g)
• DIMENSIONS: 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameter
• OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
• OPTIONAL INTERCHANGEABLE ELEMENTS
• UE-H hypercardioid (100°);
• UE-O omnidirectional (360°);
• UE-UL UniLine™ (90°)
• ACCESSORIES FURNISHED: AT8153 two-stage foam windscreen; AT8662 shock mount
• AUDIO-TECHNICA CASE STYLE: M34