Audio-Technica AT4050 Multi-pattern Condenser Microphone

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Transparent uppers/mids balanced by rich low-end qualities combine withadvanced acoustic engineering for extensive performance capabilities andhighest quality
• Dual-diaphragm capsule design maintains precise polar pattern definitionacross the full frequency range of the microphone
• The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-stepaging process so that the optimum characteristics achieved remain constantover years of use
• Three switchable polar patterns: omni, cardioid, figure-of-eight
• Transformerless circuitry virtually eliminates low-frequency distortionand provides superior correlation of high-speed transients
• State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Custom shock mount provides superior isolation

Specifications:

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid, Omnidirectional, Figure-of-eight
• Frequency Response: 20 Hz -18 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL,with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamice Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 4.2 mA typical
• Switches: Polar Selection; Flat, roll-off; 10 dB pad (nominal)
• Weight: 18.0 oz
• Dimensions: 7.40" long, 2.10" maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands;microphone dust cover; protective carrying case