Made in the USA, by an American! Support American made products Our future depends on it!!!

• a hypercardioid pickup pattern and
• a uniform frequency response of 50-18kHz.

• Transformerless design, low impedance, and balanced output allow interference-free performance even with long cable runs.
• The OM3xb produces a highly accurate, natural sound with slight bass proximity.
• A dentresistant spring-steel grill and sound pressure handling capabilities in excess of 144dB add to the OM3xb's road-worthiness.
• The OM3xb’s tight pattern and high off-axis rejection offer unmatched gain beforefeedback at an affordable price. The high rejection also allows multiple miking in tight quarters (i.e. small clubs) with little bleed through or feedback.
• The OM3xb has added warmth in the lower mid-bass and a slight boost in the mid-range;
• it sounds particularly full and clear on small-to-mid size PA systems without having to add EQ or pad the sensitivity.
• Microphone placement is not an exact science and depends on the room size, the PA system, and the musicians.

Features

• Transducer Type Dynamic
• Frequency Response 50 Hz- 18kHz
• Polar Pattern Hypercardioid
• Output Impedance 250 ohms
• Sensitivity 2.5mV/ Pascal
• Capsule Technology VLM Type B
• Off axis rejection >25dB
• Maximum SPL >144dB
• Cable/Connector 3 pin XLR gold
• plated male XLR
• Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing Zinc alloy
• Weight 10.87oz/308.4 grams
• includes, OM3XB mc, mic pouch, and mic clip