Home > Accessories > Audio Accessories > Floor pockets, Stage boxes for Audio Connectors >

ACE Backstage 122SLBK full Pocket-Standard Lid - Black

ACE Backstage 122SLBK full Pocket-Standard Lid - Black
 
-------------- Alternate Views: ---------------
List Price: $256.39
Product Price: $256.39
You'll earn 211 points
PLEASE NOTE: 122SLBK
Mfg Model SKU 122SLBK
.


Free Shipping

Availability: Usually Ships in 1 to 2 Days

Product Code : 122SLBK
QTY:

DESCRIPTION
 
122SLBK full Pocket/Standard Lid - textured Black, ACE Backstage




• Full Stage Pocket Body Size = 8.000” W x 3.500” H x 7.187” D
• Full Stage Pocket Lid & Mounting Flange Size = 10.500” W x 1.000” H x 10.500” D
• Full Stage Pocket Connector Capacity = Up to 12 “Connectrix”, Neutrik®, or Switchcraft®
• Full Stage Pocket Cutout Dimensions = 8.500" W x 8.500" H
• Full Stage Pocket Material = CRS Steel and/or Solid Half Hard Brass
• Full Stage Pocket Panel Capacity
will acccomodate these panels:
• (2) #PNL-100 Series “CONNECTRIX” Panels OR
• (2) #PSW-100 Series Switchcraft® Panels OR
• (2) #PE Series Single Gang Electric Duplex Switch Box Panels OR
• (1) #FP3E Series Triple Gang Electric Duplex Switch Box Panel OR
• (1) #PNL-120 Series “Connectrix” Panel




The Full Stage Pocket has the panel capacity for either:
• (2) #PNL-100 Series "Connectrix" Panels or
• (2) #PSW-100 Series Switchcraft® Panels or
• (2) #PE Series Single Gang Electric Duplex Switch Box Panels or
• (1) #PNL-120 Series "Connectrix" Panel

The Full Stage Pocket has the connector capacity for either:
• (12) "Connectrix" Connectors or
• (12) Neutrik® Connectors or
• (12) Switchcraft® Connectors or
• (6) "Connectrix", Neutrik®, or Switchcraft® Connectors and (1) #PE Electric Duplex Switch Box

Utilizing ACE's "Connectrix" System will allow mounting of up to 12 "Connectrix", Neutrik®, Switchcraft®, and/or Custom Connectors in the Full Stage Pocket. All ACE Full Stage Pockets are welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange and a 16 ga. (.062") thick Pocket Body. The Full Stage Pocket resists bending under even the most severe stage loads.

Removable spring loaded hinge pins permits easy exchange of lids for carpet lids, locking lids, standard lids, and other custom application lids. A generous cable way slot of 3/8" x 8" permits easy cable exit from the stage pocket, even for large gauge cables. A cableway slot closure channel closes the slot when not in use. The Full Stage Pocket has an easy installation into 8.5" x 8.5" cutout in the stage floor. Open easy access from top or back of the Full Stage Pocket to connector panels makes for easy installation.

A scratch/wear resistant finish, oven cured powder coat is electro-staticly applied inside and outside the entire Stage Pocket. Decorator neutral Antique Copper Vein or Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange are also available by special order. The Full Stage Pocket's solid rubber Lid Stops cradle the lid to prevent lid rattle.
Features
LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors*. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.

DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.

SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.

CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.

EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.

DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.

RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.



Related Products
Ace Backstage ACE Backstage 104BBX Standard Metal Backbox for 124SLBK Double Wide Pocket
Product Price: $189.35

Add Free Shipping
ACE Backstage Standard Metal Backbox for 124SLBK Double Wide Pocket




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:

Accessories > Audio Accessories > Floor pockets, Stage boxes for Audio Connectors
Accessories > Audio Accessories
Accessories